1. First of we show the metal spring clip with its gap on top. The gap can be seen easily in the holder shadow on the table.

2. Start to slide the nib by placing the nibs rear end to saddle across the gap. Use a slight angle to start to get the nib to slide between the plastic and the spring steel.

3. Push the nib firmly inside the holder slot, the spring steel will give a little to allow this.

4. Push the nib down until it fits solidly, without being loose at all. This will be about 1/2 to ¾ of the way down the nibs length. The nib is now ready to write with.